Removal and installation the ignition and starter switch
1. Disconnect the negative cable from the battery.
2. Remove the lower steering column cover.
3. Remove the sealing paint and unscrew the countersunk screws (1).
4. Pull the ignition and starter switch (2) in the direction indicated by the arrow.
Note: When installing, it is necessary to cover the heads of the countersunk screws (1) with sealing paint.
5. Release the lock (3) in the direction indicated by the arrow and disconnect the connector (4) from the ignition and starter switch (2).
6. Installation should be carried out in the reverse order of removal, taking into account the above notes.