Throttle body (N52 K) (BMW X3 E83)

Removal and installation the throttle body (N52K)

Caution: Observe electrostatic discharge protection instructions.

1. Turn off the ignition.

2. Remove the air intake hose.



3. Unlock and disconnect the connector (1).

4. Remove the screws.

Tightening torque: 9 Nm.

5. Remove the throttle body (2).

Note: When installing, it is necessary to replace the sealing ring (1) of the throttle body (2).

6. Installation should be carried out in the reverse order of removal, taking into account the above notes.

Note:

• Check the recorded fault codes.
• Clear fault codes.