1. Turn off the ignition.
2. Remove all pressure pipes.
Attention:
- When working with the power supply system, extreme cleanliness must be maintained.
- Do not allow dirt or foreign objects to enter the system.
- Use only lint-free cloths.
- Before installation, clean pipelines or parts from dirt.
- Seal all open holes in the fuel system with protective plugs.
Attention:
- When working with oil, fuel and coolant circuits, the generator must be protected from contamination.
- Cover the generator.
- Failure to comply with this condition may result in generator failure.
Attention:
- Collect and dispose of leaking fuel.
- Observe the applicable national disposal regulations.
3. Unscrew the union nut of the high-pressure line between the receiver and the high-pressure pump.
Tightening torque: 23 Nm.
4. Disconnect and unplug the connectors (1 and 2).
5. Unscrew the bolts and remove the receiver (3).
6. Installation should be carried out in the reverse order of removal, taking into account the above notes.
7. Check the system for leaks.