Removal and installation of all injection system injectors (M54)
1. Remove the bracket (1).
2. Disconnect the injector from the branch of the distribution line.
Note: When installing, check and replace the O-rings if necessary.
3. Insert the nozzle completely into the outlet of the fuel line, then remove it so that the groove is flush with the edge of the outlet of the fuel line.
4. Put on the bracket.
Note: To facilitate installation of the fuel injection line branch, lubricate the injector O-rings with a lubricant.
(The original source of the article is on the website: www.bmwman.ru)