Insert the disc and thrust washers into the differential box, directing the lubrication grooves upward, i.e. towards the discs.
Reassemble the differential in the reverse order of disassembly until the thrust washer is installed.
Insert the disc and thrust washers into the differential case cover, directing the lubrication grooves upward, i.e. towards the disks.
Install the cover onto the differential case and tighten the eight cover mounting bolts, after cleaning them and applying a special adhesive such as Loctite to the threads.
Insert the output shafts into the differential box.
Clamp the output shaft flange in a vice and measure the torque of the differential bearings with a torque wrench, which should be within 30-50 N·m. If the value deviates from the norm, disassemble the differential again and install discs of the required thickness.
Reassemble the differential and recheck the torque of the differential bearings.