- 1st stage - 20
- 2nd stage - Turn to an angle of 90°
- 3rd step - Turn to 90° angle
Automatic transmission to engine mounting bolts
Hexagon head bolts:
- Bolts M8 - 25
- Bolts M10 - 45
- Bolts M12 - 82
Slotted head bolts:
- Bolts M8 - 21
- Bolts M10 - 42
- Bolts M12 - 72
Screws for fastening the balance shaft housing to the crankcase *:
- 1st stage - 25
- 2nd stage - Turn to an angle of 90°
Covers for balance shaft supports to the lower section (m43TU engine)*:
- 1st stage - 22
- 2nd stage - Turn to an angle of 100°
Bolts for fastening the lower connecting rod head caps *:
- 1st stage - 20
- 2nd stage - Turn 70° further
Nuts for fastening the camshaft support caps:
- Nuts M6 - 10
- Nuts M7 - 15
- Nuts M8 - 20
Pin screwed into the camshaft - 20
Camshaft Sprocket Bolts:
- Bolts M6 - 10
- Bolts M7 - 15
Crankshaft hub bolt*:
- Engine N42 - 300
- Engine M42TU - 330
Crankshaft rear oil seal housing mounting bolts:
- Bolts M6 - 10
- Bolts M8 - 22
Bolts for fastening the vibration damper to the crankshaft hub:
- Engine N42-34
- Engine M43TU - 22
Cylinder Head Bolts*:
- 1st stage - 30
- 2nd stage - Turn 90° further
- 3rd stage - Turn 90°
Cylinder Head Cover Bolt Cap (n42 engine) — 45
Cylinder Head Cover Bolts:
- Bolts M6 - 10
- Bolts M7 - 15
Crankshaft faceplate mounting bolts* (automatic transmission) — 120
Screw of magnetic rotor of eccentric position sensor (n42 engine) — 8
Front amplifier *:
- 1st stage - 59
- 2nd stage - Turn 90° further
- 3rd stage - Turn 30° further
Front Subframe Bolts*:
- Bolts M10 - 45
- Bolts M12 8.8 - 77
- Bolts M12 10.9 - 105
Lower suspension arm bracket to body mounting bolts — 59
Flywheel to crankshaft mounting bolts *:
- Engine N42 - 130
- Engine M43TU - 120
Main Bearing Cap Bolts*:
1st stage - 20
2nd stage:
- Engine N42 - Turn 70°
- Engine M43TU - Turn 50°
Bolts securing the manual transmission to the engine:
Hex Head Bolts:
- Bolts M8 - 25
- Bolts M10 - 49
- Bolts M12 - 74
Slotted head bolts:
- Bolts M8 - 22
- Bolts M10 - 43
- Bolts M12 - 72
Oil pressure alarm sensor - 27
Oil pump to cylinder block (m43TU engine) — 23
Oil pump cover - 10
Oil pump sprocket:
Engine N42 - 30
Engine M43TU:
- M6 - 10
- M10 - 25
Oil Sprayer - 10
Steering gear support nuts * - 42
Pallet:
Engine N42* — 30
Engine M43TU:
Upper section:
- M6 - 12
- M8 - 22
Bottom section:
- M6 - 12
- M8 - 22
Drain plug of the pan:
- M12 - 25
- M18 - 30
- M2 2 - 60
Lower plug of the timing chain cover - 45
Upper/Middle Timing Chain Cover Cap - 25
Timing Chain Cover:
- M6 - 10
- M7 - 15
- M8 - 22
- M10 - 47
Timing Chain Tensioner Plug - 40
Timing Chain Tensioner Cylinder:
- Engine N42-65
- Engine M43TU - 50
* Do not reuse
The original text is available on the website «BMWMAN.RU»