Withdrawal
Remove instrument panel.
Remove the daily mileage reset knobs and the check-control button from the front side of the instrument panel.
Unscrew the screws -arrows- fold up the housing half with the electronic circuit board.
Attention: In the variant with extended equipment, there are knurled screws in places 1. To loosen, turn the knurled screws to the left by 90°. When disconnecting the case halves, do not allow the LCD module to fall out. Distance rings are installed on the lower screws.
Carefully pull the appliances up. At the speedometer, first remove the two screws -arrows-.
Installation
Insert into the housing and screw the speedometer.
Screw the board into the housing.
Put on the knobs for resetting the daily mileage and check-control.
Install the instrument panel.
Check the functioning of the devices.