The length of the cover is 1.2 meters. Taking into account the length of the trunk, it can carry skis up to 2.1 meters long. When loading skis of this length, the capacity of the cover is reduced, so that it can accommodate no more than two pairs of such skis.
Packing skis into a case
Lower the rear seat center divider armrest and remove the trim panel secured with Velcro.
Squeeze the latches shown by the arrows and remove the armrest.
Note: When installing the armrest, make sure that the locking tabs fit securely into the grooves.
Press the round button, this will open the loading hatch in the trunk. Detach the holder at the top and lower it.
Straighten the cover and place it between the front seats. The zipper is designed to simplify access to the items loaded into the cover, as well as to dry it.
Attach the tailgate flap on the boot side to the magnetic holders on the underside of the shelf behind the rear seat. Make sure that the skis are clean when loaded into the bag and avoid damaging the bag with sharp edges.
If you are not going to use the case for a long time, make sure it is well dried. During use, periodically clean and dry the waterproof case.
(This publication was borrowed from an online resource BMWMAN.ru)