Apply throttle with throttle lever 2 to relieve the throttle cable nipple.
Pull the nipple out of the clamp with a narrow screwdriver.
Squeeze the clamp, pull it out of the hole in the throttle lever and remove it from the throttle cable 1.
Disconnect the throttle cable through the slot on the throttle lever.
Pull the cable sheath 1 out of the rubber tip 2.
Pass the cable through the rubber tip.
Connection
Insert the gas cable through the rubber tip of the support, insert the cable sheath into the rubber tip.
Slide the plastic clamp onto the throttle cable.
Apply a little gas with the throttle lever, insert the cable into the hole in the holder, snap the clamp and insert the nipple into the clamp.
Check the throttle cable adjustment.
The original text of the article is available on the resource BMWMAN.ru