Withdrawal
Remove door trim.
Remove the tweeter cover. Remove the front part of the window glass trim from the passenger compartment (pinch protection pad) - It is not necessary to completely remove the lining. Remove the foam rubber insulation from the tweeter (triangular shape).
Unscrew fastening, slide tweeter -1- up and remove.
Remove upper screw -2-.
Slightly press rubber seal to one side and remove front screw -3-.
Press the wires with plug and insert through the hole in the door and remove the mirror.
Installation
Lead the electrical wires of the mirror drive system together with the insert through the hole in the door
Fit the outside mirror, screw it in with two screws and tighten them to 5 Nm.
Insert the tweeter from above along the guide rail and tighten the fastening screws to 5 Nm.
Replace foam rubber insulation (triangular shape) high frequency speaker.
Install the front part of the window trim on the interior side, press the cover of the tweeter.
Install door trim.