Removal and installation an antenna amplifier (Touring) (BMW 5 Series E39)

Removal

Unfasten the trim at the top of the roof frame.

Note: The clips can be left on the pad pins. It is advisable to insert all 5 clips into the bushings immediately after removal.

Unfasten cover "1" of the antenna amplifier by moving it downwards. 2 — sealing cuff, does not need to be removed.

Unscrew the nut, lift the wire tip and pull out the antenna amplifier.

Disconnect the plug connector and remove the antenna amplifier.

Installation

Connect the antenna amplifier plug.

First, place the antenna amplifier on the pin, then connect the wire tip to both ground wires, and then tighten the nut.

Check if all 5 clamps are inserted into the roof frame trim bushings, if not, insert them. Press the trim and secure.