Attention: This erases the contents of memory devices, such as the engine trouble code memory. Follow the instructions given in the chapter "Removing and installing the battery".
Example: hazard warning light switch
Unfasten the cover of the gear lever towards the top and push it onto the lever handle.
Press the foam rubber soundproofing aside. Working through the hole in the center console, press the switch from below.
Disconnect the switch connector.
Example: seat heating switch.
Remove the heating / air conditioning control unit.
Working through the hole in the center console, press the switch from below.
Disconnect the plug connector of the switch by squeezing the locking mechanism with your fingertips.
Example: light switch
Remove control knob -1- from light switch.
Remove the instrument panel mounting frame.
Unscrew nut -4- from switch shaft.
Remove trim from switch -2-
Disconnect the plug.
Press light switch -3- downwards out of frame.
Installation is carried out in reverse order.
Connect ground wire (-) battery. Set clock. Tune your radio to the transmitting radio stations.