- Front wheel arch liner;
- Front direction indicator;
- Front bumper assembly and its cover;
- Floor covering;
2. Upper wing lining.
3. Give away the fasteners.
Front fender lower mounting bolts
Front fender mounting screw
Rear front fender mounting bolts (with the door open)
Upper front fender mounting bolts
4. Secure the hood so as not to damage the windshield and adjacent body parts. Unscrew the bolts (1 and 2) and remove the wing.
5. Installation is carried out in the reverse order. Adjust the wing so that the gaps between the wing and the door/bonnet are uniform. Cover the connecting edges with sealant. Check the installation of the bonnet and, if necessary, adjust the gaps (see Specifications in Chapter Body).
(The original version is on the portal: «BMWMAN.ru»)