Caution: Secure the hood in the open position using a suitable device. Risk of injury.
Note: Symbols should be matched to the corresponding vehicle type.
1. Loosen the screws (1).
2. Loosen the screws (2).
3. Remove the hood.
Note:
- When installing, it is necessary to install the hood along the marks left by the screws on the hinge. In this case, there will be no need for adjustment after installation.
- If this is not possible, adjust the hood.
Tightening torque: 15 Nm.
4. Installation should be carried out in the reverse order of removal, taking into account the above notes.