Withdrawal
Disconnect plug connection for windscreen washer nozzles.
Disconnect the fluid supply hose for the windshield washer nozzles from the distributor.
Mark the installation position of the compensation plate at the hinges by tracing around the plates with a felt-tip pen -arrow-
Support the engine compartment hood securely or have an assistant support it.
Unscrew bolt -1- on left and right, loosen bolt -2-.
At the right hinge, unscrew the fastening of the ground wire.
Remove the hood with an assistant.
Installation
Together with an assistant, put the hood in place and easily tighten the bolts -1-.
Align the hood in accordance with the marked marks and tighten the mounting bolts.
If a new hood is installed, it must be adjusted.