Note:
- The specified clearances are fundamental for adjustment work.
- As the hinges are further displaced, unpainted surfaces become visible. They need to be painted in the appropriate color.
Note: Symbols should be matched to the corresponding vehicle type.
1. Loosen the screws (1) and (2) of the left and right hinges. The hood should become movable.
Note: If the adjustment range is insufficient, you can loosen the screws securing the hinge to the body and move the hinge.
Note: The locks and grab hooks must engage properly.
2. Adjust the hood.
Note: A stop buffer is used to adjust the height of the hood relative to the front fenders.
3. Unscrew the screw (1) and remove the cover (2).
4. Adjust the height of the hood by turning the locking hook (3).
5. Retighten all threaded fasteners.
Tightening torque: 15 Nm.
Caution: Check the operation of the grappling hook.