2. Remove the trim in the left footwell.
3. On the brake pedal, remove the locking bracket (1) and take out the locking pin.
4. Unscrew the nuts (2).
Note: Self-locking nuts must be replaced during installation.
Tightening torque: 21 Nm.
5. Carefully remove the amplifier (1) from the front shield, rocking it in different directions.
Caution: To avoid damaging the brake booster, do not apply excessive force when removing or installing it.
6. Fold up the cover (2) of the microfilter and remove the amplifier (1) in the direction indicated by the arrow.
7. Installation should be carried out in the reverse order of removal, taking into account the above notes.
8. Bleed the brake system.