Attention:
- When used with xenon headlights, high voltage is life-threatening. Before removal, disconnect all components from the power source (the lighting system and ignition are off).
- Work with all components of the xenon lighting system (gas discharge initiator, control unit and lamp) should be performed only by qualified personnel.
Caution: Follow the ESD protection instructions (ESD - Electrostatic Discharge).
1. Remove the left headlight.
2. Loosen the screws (1).
Tightening torque: 1 Nm.
3. Disconnect the xenon headlight control unit (2) from the headlight.
4. Disconnect the connectors (1).
5. Remove the xenon headlight control unit (2).
Note:
- When installing, it is necessary to pay attention to the correct position of the seal (3) on the headlight.
- Pay attention to the correct laying of the wire harnesses.
6. Installation should be carried out in the reverse order of removal, taking into account the above notes.