Removal and installation the left or right fog light (until 09/2006)
Caution: Follow the instructions for handling incandescent lamps (external lighting).
1. Release the fog light cover (1) from the clamps through the hole (2) and remove it from the front bumper trim (3).
Note:
- When installing, make sure that the fixing tabs (1) of the fog light cover (2) are not damaged.
- Pay attention to the correct position and secure fixation of the fog light cover (2) on the front bumper trim.
2. Loosen the screws (1).
Tightening torque: 2.5 Nm.
3. Remove the fog light (2) from the front bumper trim (3) in the direction indicated by the arrow.
4. Disconnect the corresponding connector.
5. Remove the fog light (2).
6. Remove the incandescent lamp.
Note: Only when replacing the fog light.
7. Installation should be carried out in the reverse order of removal, taking into account the above notes.
8. Adjust the fog light.
Note: Only when replacing the fog light.