Withdrawal
Disconnect the ground wire from the battery.
Remove lower dashboard trim (see section «Removal and installation of the middle console and shelves under the dashboard»).
Remove steering wheel (see section «Removal and installation of a steering wheel»).
Loosen the steering column trim screws.
Loosen the lower steering column cover screws. Take off facing.
Unscrew earth wire -1-, unscrew screw -2-, remove turn signal switch.
Disconnect connector -1- together with turn signal relay -2-. Unplug connector from wire -3- for fanfare.
Disconnect cable connectors and connector -1-.
Installation
Insert turn signal switch and secure with screw.
Fasten the ground wire to the steering column with screws.
Connect the turn signal relay connector. Put on the fanfare wire connector.
Connect the turn signal switch connector and then the cable connectors.
Screw on steering column trim.
Install lower dashboard trim (see section «Removal and installation of the middle console and shelves under the dashboard»).
Install steering wheel (see section «Removal and installation of a steering wheel»).
Connect ground wire to battery.
Check the operation of the direction indicators.