Lifting and towing a car (BMW 5 Series E12)

Lifting with a portable jack

On each side of the car, reinforced sockets are provided in the door frames for installing a rack jack with a movable lever. When installing the jack, the upper part of the jack should be moved away from the vertical axis of the car, simultaneously ensuring a reliable stop of the jack support and eliminating the possibility of damaging the door.

Using a garage jack

At the front of the car, it is necessary to place the jack levers under the crossbar, placing wooden pads underneath.

At the rear of the vehicle, the jack levers should be positioned under the rear beam. Do not use the rear axle housing as a support.

Towing

the towing cable is attached at the front to the eyes in the lower right part of the body, and at the rear to the eye in the middle of the rear lower part of the body.

Towing a car with an automatic transmission is permitted for a distance of 40-50 km at a speed of no more than 50 km/h. In this case, the selector lever should be set to the "N" or "O" (neutral) position, depending on the model.

When towing for a longer distance, pour 1 liter of ATF oil into the gearbox housing above the "maxi" mark on the dipstick. After repair, restore the normal oil level in the gearbox housing.



When towing a significant distance, it is necessary to raise the rear of the vehicle or disconnect the propeller shaft from the automatic transmission output shaft flange.