- remove the protective cover of the right headlight and disconnect the headlight power wire;
- disconnect the fluid supply pipe to the windshield washer;
- remove the hood, noting the exact position of its hinges;
Note. When removing the hood hinges, block the locking levers loaded with a large force of compensating springs.
- remove the clutch slave cylinder, disconnect the clutch hydraulic supply line from it;
- disconnect the cardan shaft from the gearbox;
- disconnect from a transmission draft of a drive of a gear change, disconnect a wire from the light switch of a backing;
- place a mobile garage jack under the gearbox housing, support the gearbox with it and unscrew the bolts securing the gearbox to the floor of the body;
- Remove the power unit from the vehicle with the front of the engine towards the left side of the engine compartment.
The installation of the power unit is carried out in the reverse order of removal.