Actions in the event of a malfunction of the electrical system:
Remove the cover, move the tilt-and-slide sunroof in the desired direction with an Allen wrench (is in the tool kit attached to the car).
Contact a BMW service to have the defect rectified.
Double sliding-lifting sunroof
Actions in the event of a malfunction of the electrical system:
Closing the front hatch - remove the cover in front of the manhole opening, insert a wrench with an Allen key (is in the tool kit attached to the car) in the hexagon of the motor drive (see illustration above) and rotate counterclockwise.
Closing the rear hatch - dismantle the plug behind the hatch opening, use a screwdriver if necessary.
Turn the socket wrench counterclockwise only.
This hatch can only be closed manually, in no case should it be opened, and before that it must be closed:
- first front;
- and only then the rear hatch.
Observe the following when closing both sunroofs. Before inserting the wrench, be sure to use the flat end of the wrench to pull out the sleeve located around the hexagon. After the hatches are closed, fix it in its original position.
Contact a BMW service to have the defect rectified.