Note: Removal and installation of the headlight lens are described in chapter "Removal and installation of the electric motor of the system for regulating the angle of inclination of the headlight beam".
Withdrawal
Open the engine compartment hood.
Loosen trim -2- from inside -1- and carefully press downwards out of holders -3- with a screwdriver. Unclip trim -4- from outside.
Disconnect all connectors from the back of the headlight.
Mark the mounting position of the headlight by circling the washers with a felt-tip pen. Loosen the fastener and pull out the headlight towards the front.
Installation
Insert headlight and screw.
Connect plug connectors.
Hang the cover under the headlight from the outside, tilt it inward and fasten it.
Check headlight beam adjustment.