Insert shock absorber and V-belt tensioner bracket and secure.
Install the V-belt. Attach the front muffler pipe.
Attach a heavy-duty screwdriver or similar lever to the tensioner. Squeeze the belt tensioner and remove the V-ribbed belt.
Put on a new V-ribbed belt according to the diagram shown, while pulling the tension roller completely to the right, just as when removing. Pay attention to the correct position of the grooves on the belt pulleys.
Unload the tension roller. Tension is generated by a hydraulic tensioner and is not adjustable.
If removed, install the engine compartment mudguard.
Lower the car.