2. Mark the position of the lower part of the trunk lid lock on the rear panel of the car body.
3. Remove the screws (1) on the bottom part (2) of the lock.
4. Disconnect the connector (1) from the servo drive (2) and remove the lower part (3) of the lock.
Note: When replacing, it is necessary to unscrew the screws (1) of the servo drive (2).
5. Remove the emergency release mechanism (2) of the servo drive (1) from the mount (3) on the lock (4).
Note: Only when replacing the servo drive, it is necessary to disconnect the lever (1) of the emergency release mechanism from the servo drive (2).
6. Installation should be carried out in the reverse order of removal, taking into account the above notes.