1st stage - position light
2nd stage - low beam
If the ignition is switched off while the dipped beam is on, only the side light remains on.
Vehicles without a control and warning display - after turning the ignition key to position 0, a buzzer sounds for a few seconds to remind you that the light is not turned off.
The buzzer stops when you press the reset button for the daily trip odometer.
Cars with control and signal display - a reminder is made by indication on the control and signal display.
Instrument panel lighting
Lighting control is carried out by rotating the roller.
Dipped beam for driving during daylight hours
If required, the light switch can be left on the second stage; When the ignition is switched off, the dipped beam and side light will automatically go out.
On some models, depending on the version, the daytime running lights come on automatically when the ignition key is turned to position 2, even if the light switch is in position 0.
Combined turn signal/headlight switch
1 - high beam (blue pilot lamp)
2 - High beam flashing
3 - direction indicator (green warning lamp and intermittent horn of turn signal interrupter relay)
Accelerated flashing of the lamp and clicks of the breaker indicates that one of the direction indicator lamps has burned out.
Non-fixed position of the turn signal lever
Do not lock the switch lever when starting a maneuver or changing the lane. The lever returns to its original position automatically.
Parking lights port and starboard
Squeeze the lever down beyond the switching position of the corresponding turn signal.