Removing the side grille elements
Open the lock of the engine compartment hood.
Remove 5 screws -arrows- and pull out grille element.
Installation is carried out in the reverse order.
Removing the middle part of the grille
Open the lock of the engine compartment hood.
Remove screws -arrows- and remove headlight cover. Remove the cover of the other headlight in the same way.
With the engine compartment hood open, unscrew bolt 1. Then release 2 clips next to the bolt
Use a screwdriver to press the left and right clamps from the side of the engine compartment. To release from the latches, press the decorative grille slightly forward.
Use a screwdriver to press clamp 3 through the hole in the grille, thus releasing the grille.
The photo shows the position of the clips on the removed decorative grille.
Installing the middle decorative grille
Place the decorative grille and press it in the places where the clips are located until they click into place.
Screw in the decorative grille screws from above.
Install headlight covers.