It is not allowed to reuse the drained power steering fluid.
1. Remove the engine crankcase protection.
2. Remove the power steering pump drive belt (see chapter Engine).
3. Disconnect the pipelines from the power steering pump.
Connection of pipelines to the vane pump
1 - To the steering
2 - To the tank
Connecting the piping to the tandem pump
1 - To the steering
2 - To the tank
3 - To the ride height regulator
When installing, replace the pipe seals.
4. Give a nut.
When installing, fasten the stud (1) on the pump, tighten the nut (2) by hand towards the engine mount bracket and tighten the nut (3).
5. Turn out bolts of fastening of the pump to an oil case and remove the pump.
6. Installation is carried out in the reverse order.