2. Remove the bolts.
When installing, do not forget to install the locking plates (1).
3. Remove the flange nut (1).
When installing, use a new nut and lock it.
4. Press out the drive shaft of the drive wheel using tool No.33 2 111/116 /117.
5. On models with ride height control, disconnect the control arm from the wheel bearing support.
6. Disconnect the shock absorber from the wheel bearing support. Raise the wheel bearing support with a lift and remove the shaft.
When installing, the head (1) with the flats of the rubber-metal hinge must face the head of the bolt.
7. Press in the wheel drive shaft using tool No.33 2 115/116/118.
[The original article is available on the website «BMWman»]