Removal and installation the front ride height sensor
Caution: Follow the ESD protection instructions (ESD - Electrostatic Discharge).
1. Disconnect the connector (1).
2. Unscrew the nut (2) and disconnect the rod.
Tightening torque: 8 Nm.
3. Loosen the screws and remove the sensor (4).
Note: When installing, make sure that the lever (3) of the ride height sensor is directed away from the sensor (4) towards the right front wheel.
Tightening torque: 5 Nm.
4. Installation should be carried out in the reverse order of removal, taking into account the above notes.
5. Check and, if necessary, adjust the position of the headlights.