Withdrawal
1. Remove the headlight, refer to Section Removal and installation of a headlight.
2. Detach the annular cover.
3. Remove the headlight assembly seals.
4. Press the headlamp assembly away from the three ball heads (two heads for manual adjustment -1- and one for headlight adjustment -2-) and take it out. The seals are pushed together.
5. Disconnect the connector -4-.
6. Turn away bolts of fastening of the electric motor of adjustment of range of light -3- and take out it.
Installation
7. Insert the dimmer motor and secure it.
8. Dock the connector.
9. Install the headlamp assembly through the seals, resting it on the three ball heads.
10. Put the seals on the headlight assembly.
11. Insert the headlamp assembly into the annular cover and secure.
12. Fix the sealing frame -1-.
13. Install the headlight and adjust it, refer to Section headlight adjustment.
14. Set the turn signal, refer to Section Replacing incandescent outdoor lighting.