Withdrawal
1. Remove the turn signal, refer to Section Replacing incandescent outdoor lighting.
2. Remove a peak under a headlight.
3. Disconnect the sealing frame -1- around the circumference from the outside to the inside, starting with the headlight direction indicator.
4. Disconnect the annular cover with brackets -2- around the circumference and remove.
Installation
5. Insert the ring cover and fix it.
6. Insert sealing frame -1-.
7. Connect the visor from the outside under the headlight, tilt inward and lock.
8. If there is a headlight washer nozzle, install it, refer to Section Removing, installing and checking headlight washer nozzles.
9. Set the turn signal.
In conclusion, adjust the headlight at the service station.