- automatic glare reduction system (electrochromizing technology);
- remote control with infrared block;
- automatic garage door openers;
- rain intensity sensor;
- remote radio control.
Attention! Do not rotate the mirror while removing the interior mirror.
The mirror must not be detached from the base (grounds), otherwise the rear latch will be damaged and the mirror will not be firmly held in the mount.
Don't pull the mirror back (inside the cabin) when released from the latches, due to possible damage to the windshield.
The dismantling of a rear-view mirror with a version with an automatic glare reduction system and / or with a remote control of the infrared unit must be carried out in the following order. Disconnect «–» terminal from AB. Hook up and remove the cover (arrow, fig. 18.90) from the rack and disconnect the loop.
To release the mirror from the latches, do not pull it back or turn it because of the risk of damaging it. Release the mirror (1, fig. 18.91) from the base, hitting it forward with the palm of your hand, and remove it.
When installing the rear-view mirror in the passenger compartment, it must be mounted on the plinth, having previously rotated approximately 45°, (arrow, fig. 18.92) and rotate the mirror leg until it clicks into place on the base.
In the version of the mirror with remote control of the central locking with an infrared unit, it is necessary to initialize all transmitters of the car keys.