When installing the pulley, tighten its mounting nut to a torque of 70 N·m (7.0 kgf·m).
[The original entry can be found on the portal «BMWMan.ru»]
- Home
- BMW X5
- E53
- M54 petrol engine
- Engine electrics
- Replacing the alternator belt pulley
Replacing the alternator belt pulley (BMW X5 E53)
The alternator belt pulley must be replaced in the following order. Prepare the "12.7.110" device. Remove the alternator drive belt. Depending on the alternator version, hold its axis from rotating with a hexagonal socket wrench, multi-tooth socket wrench or Torx key. Unscrew the pulley nut using the "12.7.110" device (fig. 3.170) and remove the pulley.
When installing the pulley, tighten its mounting nut to a torque of 70 N·m (7.0 kgf·m).
[The original entry can be found on the portal «BMWMan.ru»]
When installing the pulley, tighten its mounting nut to a torque of 70 N·m (7.0 kgf·m).
[The original entry can be found on the portal «BMWMan.ru»]
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Article verified: Zhuravleva Isolda
Share information:
Previous articles
БМВ E53: Engine electrics
Next articles
Similar articles on other types of BMW cars:
Replacing and tensioning the alternator V-belt on 316i, 318i, 318is… BMW 3 Series E36 (1990-2000)
Adjusting the alternator drive belt tension BMW 3 Series E21 (1975-1983)
Replacing the camshaft drive belt of the 6-cylinder BMW «520» and… BMW 5 Series E12 (1972-1981)
Removal and installation the alternator V-belt / tensioning the V-belt BMW 5 Series E34 (1988-1996)
Replacing the oil filter (center bolt design) BMW 7 Series E32 (1986-1994)
Replacing the cabin filter (ventilation system) BMW 7 Series E38 (1994-2001)
V-ribbed alternator drive belt BMW X3 E83 (2003-2010)
Replacing and tensioning the alternator V-belt on 316i, 318i, 318is… BMW 3 Series E36 (1990-2000)
Adjusting the alternator drive belt tension BMW 3 Series E21 (1975-1983)
Replacing the camshaft drive belt of the 6-cylinder BMW «520» and… BMW 5 Series E12 (1972-1981)
Removal and installation the alternator V-belt / tensioning the V-belt BMW 5 Series E34 (1988-1996)
Replacing the oil filter (center bolt design) BMW 7 Series E32 (1986-1994)
Replacing the cabin filter (ventilation system) BMW 7 Series E38 (1994-2001)
V-ribbed alternator drive belt BMW X3 E83 (2003-2010)
Link in different formats to this page
Visitor comments
No comments yet
- General information
- Manual
- Maintenance
- M54 petrol engine
- Engine repair
- Lubrication system
- Cooling system
- Supply system
- Injection system
- Exhaust system
- Engine electrics
- M62 petrol engine
- Engine repair
- Lubrication system
- Cooling system
- Supply system
- Exhaust system
- Engine electrics
- N62 petrol engine
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Engine electrics
- Diesel engine M57
- Engine repair
- Lubrication system
- Cooling system
- Power and exhaust system
- Engine electrics
- Turbocharging system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Transfer case and cardan
- Chassis
- Brake system
- Steering
- Front suspension
- Rear suspension
- Wheels and tires
- Body
- Exterior
- Interior
- Doors and windows
- Repair and maintenance
- Heater and air conditioner
- Electrical equipment
- Equipment and devices
- Levers and switches
- Electrical circuits