2. Remove interfering exhaust system components (see chapter Power supply and exhaust systems).
3. Remove the left thermal shield.
Left manifolds
1. Loosen the nuts on the left engine mount by approximately 8 mm.
2. Remove the engine top cover.
3. Using a suitable lifting device, hang the engine from the front lifting eye for about 6 ÷ 8 mm.
4. Turn out bolts of fastening of both final collectors and remove at first a forward, and a loan - a back collector in a downward direction.
5. Installation is carried out in the reverse order. Use new gaskets and nuts; lubricate the threads of the studs with copper paste «CRC».
Right manifolds
1. Turn out bolts of fastening of both final collectors and remove at first back, and a loan - forward collector in a downward direction.
2. Installation is carried out in the reverse order. Use new gaskets and nuts; lubricate the threads of the studs with copper paste «CRC».