Remove brace (2) and fuel heating system (3) in the direction indicated by the arrow. Remove bolt (4) rubber-metal hinge for fastening the fuel filter and remove the assembly (6) fuel filter upwards.
The installation of the fuel filter should be carried out in the reverse order, while it is necessary:
- replace fuel filter (6);
- replace clamp (1);
- if necessary, replace the rubber-metal joint (5);
- assemble the engine power system;
- to remove air from the power system, bleed the system by turning on the ignition for about 1 minute, while the fuel priming pump is activated, and the fuel cooler is filled with air-displacing fuel.