Removal and installation the flywheel (BMW 7 Series E38)

1. Remove the manual transmission together with the clutch or automatic transmission (see chapter Manual gearbox and clutch or Automatic transmission).



2. Secure the flywheel using special tool No.11 2 170.



3. Remove the flywheel mounting bolts.

4. On the crankshaft flange, clean the threaded holes for the flywheel mounting bolts.



5. Installation is carried out in the reverse order. The position of the centering sleeve (1) in the dual mass flywheel is marked by two notches next to the corresponding hole in the threaded connection. Use new flywheel mounting bolts.