1. Remove the manual transmission together with the clutch or AT (see chapter Manual gearbox and clutch or automatic transmission).
2. Fix the flywheel with special tool No. 11 2 070 (see illustration).
3. Remove the flywheel mounting bolts, remove the torque converter clutch (1) and flywheel (2).
4. On the crankshaft flange, clean the threaded holes for the flywheel mounting bolts.
5. Installation is carried out in the reverse order. The position of the flywheel is fixed by a special shortened sleeve. Please note that the holes in the coupling (1) torque converter and flywheel (2) should be placed one above the other. Use new flywheel bolts.