Removal and installation the upper steering column cover
1. Remove the lower steering column cover.
2. Set the steering column to the "down" and "extended" position.
3. Remove the expansion rivet.
Note: The rivet must be replaced during installation.
4. Fold the trim cover forward.
5. Disconnect the joint cover from the facing casing.
6. Remove the steering column cover.
Note: When installing, it is necessary to check the correct installation of the steering column cover.
7. Installation should be carried out in the reverse order of removal, taking into account the above notes.
(You can read the original on the website: BMWMAN.RU)