Replacement of the top facing of a steering column is necessary for carrying out in a following order. Set steering column to position «down» And «put forward». Loosen the screw securing the upper trim of the steering column. Press the top trim on both sides and move it upwards. Press the front part of the upper trim down from the pins and remove it (pic. 12.24).
Installation of the upper lining is carried out in the reverse order, while it is necessary to replace the nut of the upper screw fastening the lining. Install the upper part and fasten it so that the hooks click into the receiving slots. Fasten the upper part with the screw, turning it with a torque of 5.0 Nm (0.5 kgf·m).