The mechanism for moving glass in the rear doors based on the power window is shown in Figure 18.81.
Rear window replacement (right or left) doors with an electric drive must be performed in the following order. Release rear door glass (without taking off), lower into the rear door shaft and disconnect the loop from the electric motor (4) window regulator. Loosen the nuts and remove the power window (1) from the back door.
When replacing the power window drive, it is necessary to unscrew the bolts (1, fig. 18.82). turn electric motor (2) in a horizontal plane and disconnect the drive (2) from the power window (3). Bottom stop (4) must not be damaged.