Note. When removing the power window, do not remove the rear door glass.
Replacement of glass of the left and right rear doors must be carried out in the following order.
Disconnect «negative» terminal from AB.
Remove rear door soundproofing.
If necessary, remove the front part of the rear door window frame trim.
Lower the glass to the specified size (Ah, fig. 18.80) approximately 85 mm. Loosen the screw (1) glass fasteners. If necessary, lower the glass into the rear door shaft and remove the door glass towards the top.
Each time the door glass is removed or replaced, the bracket must be replaced (7, see fig. 18.81). If necessary, install a new screw (9) and a nut (5) on glass. Adjustment of position of glass of a door is not carried out.