Checking the lateral and radial runout of the wheels must be carried out in the following order. Check wheel bearings, they should be good. Prepare fixture «36.1.030» - measuring device. Raise the car and place it on stands. Check with tool «36.1.030» lateral runout of the wheel (pic. 15.4). Compare the measurement results with the specifications given above.
Check with tool «36.1.030» wheel runout (pic. 15.5). Compare the measurement results with the specifications given above. If necessary, mark the position of the balancing weights and remove them.
Check with tool «36.1.030» lateral runout of the disc (pic. 15.6). Compare the measurement results with the specifications given above.
Check with tool «36.1.030» disc radial runout (pic. 15.7). Compare the measurement results with the specifications given above.
Checking the lateral and radial runout of the wheel assembly on the balancing stand must be carried out in a similar manner. To balance the wheel assembly, use weights mounted on the wheel rim.