Replacing the steering column switch bracket (BMW X5 E53)

The replacement of the switch bracket on the steering column must be carried out in the following order: Remove the steering wheel, the upper and lower trim covers from the steering column. Disconnect the SS (1, Fig. 16.12) from the turn signal/low beam switch and windshield wiper. Disconnect the wiring harness from the mount on the steering column. Disconnect the SS from the steering column adjustment switch.



Remove the bolts (1, Fig. 16.13) switch mounts. Remove the switch mounts (2) from the steering column.



Release the clamps and remove the switch (1, Fig. 16.14) wiper, moving it upwards. If present, remove the steering column adjustment switch by lifting the retainer in the direction indicated by the arrow and pulling out the switch (2). Release the clamps and remove the turn signal/low beam switch (3), moving it upwards.

Attention! When the cover is removed (1, Fig. 16.15) the steering column switch mounts (2) are secured against turning by a lock (3). It is prohibited to turn the cover (1) from the central position relative to the steering column switch mount (2).

The original text can be read on the website: «www.bmwman.ru»