1 - cylinder head; 2.7 - centering sleeve; 3.8 - screw plug (M8x1); 4 - cover (∅28); 5 - hairpin (M6x30); 6 - hairpin (M6x60); 9 - hairpin (M6x28); 10 - bolt (M8x28); 11 - harness holder; 12 - spacer; 13 - sealant; 14.30 - cover; 15 - self-blocking nut; 16 - nut (M7); 17 - hairpin (М7x95); 18, 20 - center, sleeve (∅9,5); 19 - support bar; 21 - bolt T (M6x50); 22 - bolt T (M6x70); 23 - bolt 7 (M6x100); 24 - screw plug with sealing ring (М12x1.5x26); 25 - bolt; 26.35 - sealing ring; 27 - hairpin (М7x39); 28 - hairpin (M7/6x29.5); 29 - screw plug (M18x1.5); 31 - guide sleeve; 32 - head bolt (M10x110); 33 - gasket washer; 34 - cover (∅22); 36 - screw plug (M10x1.0); 37 - cover (∅18); 38 - hairpin (M7x55); 39 - sensor; 40 - saddle issue. valve; 41 - saddle vp. valve; 42 - hairpin (M6x25); 43 - sealing gasket; 44 - check valve
They are built on the use of the Hall effect and generate an impulse of the position of the first cylinder at the TDC of the compression stroke, which is a reference signal for the start of the reference and the operation of the D-VANOS system.