Replacement of racks of fastening of a bar of the stabilizer it is necessary to carry out in a following order. Loosen the nut (arrow, fig. 14.60).
Loosen the nut (7, see fig. 14.59) and detach the rack (5) stabilizer bar attachment from rocker arm (9). Remove the anti-roll bar mount.
When replacing the rack, install the washers (8), replace the nut (7) and tighten it to 100 Nm (10.0 kgf·m). Replace nut (6) stabilizer bar mounts (5) and tighten it to 100 Nm (10.0 kgf·m).