Attention! It is forbidden to disassemble the seat belt tensioner, the spring may fly out and cause injury. Seat belts are subject to immediate replacement if any malfunctions are detected: folds; fraying; traces of compression; tears and cuts; tan.
Checking the seat belts must be carried out in the following order.
- Check the noise of the belt movement, the noise that occurs during its movement is considered normal, increased noise is not acceptable. Check the condition of the seat belt tape, scuffs, damage to the fibers of the tape with sharp objects, fire are not allowed (burn cigarette ashes). Check the ease of movement, paying attention to the location of the belt strip, twisting the belt is not allowed.
- If the auto tensioner does not work (sticks), replace the belt as a set.
- The buckle of the belt should be fixed easily and with an audible click. When you press a key «Press», the clasp should be pushed out of the lock by the action of the spring. Cleaning the belt is allowed only with a soapy solution of water, avoid the use of chemicals.