At the moment of fastening, the belt buckle should lock with a characteristic click (pic. 1.49).
To remove the belt, just press the red button, remove the clasp from the lock and hold the belt tape, direct it into the retractor.
Attention! It is necessary to ensure that when putting on the belt, it fits smoothly and evenly against the body and is not twisted.
The seat belt must be adjusted in height by moving the adjuster (pic. 1.50) by growth. The seat belt is blocked:
- when pulling the belt tape with a jerk;
- during sudden braking or acceleration;
- when passing sharp turns;
- with a strong roll of the car. The seat belt pretensioner ensures that the belt is securely attached to the occupant's body during a collision and allows them to be held securely in the seat. In a fraction of a second, the belt buckle moves back under the action of gas pressure, while the lap and diagonal belts are tightened.
On the rear, middle passenger seat, the seat belt buckle has the inscription «CENTRE» and is designed exclusively for the seat belt of a passenger occupying a seat in the middle.
Attention! Only one person can be fastened with one seat belt. It is forbidden to transport children, even infants, on your knees. Pregnant women must also wear a seat belt.