Adjustment of the lever of the automatic transmission control unit must be carried out in the following order. Check the automatic transmission control rod for freedom of movement and set the shift selector to the position «R». Holding the clamping sleeve (1, fig. 9.4, «A5S 390R»), loosen the nut (2). Move shift lever (3) control unit forward to position «Parking». Put on traction (4) in the direction indicated by the bottom arrow and release the lever.
While holding the clamping sleeve from turning, tighten the nut (2) torque 10 Nm (1.0 kgf·m). Check if the parking lock mechanism is engaged. Clamping sleeve of the lever of the automatic transmission control unit of the model «A5S 440R» shown in figure 9.7.